Heat and fire resistant. Incombustible
Thanks to its quality, the vitreous enamelled steel is termal-shock resistant. It stays inalterable in temperature ranges of -50ºC / +450ºC. It is fireproof, and in case of contact with naked flames it does not gives off any toxic gasses.
Hygenic and chemically safe
The surface of vitreous enamelled steel is hard & smooth. It does not contain critical substances as solvents or toxic heavy metals. The absence of pores, avoids dust, oil and grease absorption. Reduces the presence and growth of mold and bacteria...
Versatility and Design
Creative possibilities are almost unlimited thanks to the colour diversity and the possibility of printing images in the same material. A vast range of colours can be used, in general reference to RAl and Pantone charts
Ultra violet radiation resistant
Permanent anti-corrosion protection, thanks to the enamel coating.
Enamel colours are resistant to intense solar radiation.
Antigraffitti and easy to clean
The absence of static charge, avoids atraction of volatile dust.
Due to its chemical resistance, graffity and other dirt can be removed with detergents or solvents
It is environmentally friendly and reciclable
| |
NORMA/TEST |
VALUE |
| Hardness |
UNE 67-101 |
4-6 Mohs' scale |
| Inmersión en agua |
400 hours |
no damage |
| Adherencia del esmalte al sustrato metálico |
UNE-EN 10209/96 anexo D |
Class 3 |
| Colour difference |
BS 3996 DIN 6174 GB/T 11942-1-989 |
 E<2 |
| Resistance to corrosión by citric acid at room temperature |
UNE-EN 14483-1/05 |
min class A |
| Resistance to corrosión in boiling citric acid |
UNE-EN 14483-2/05 |
weight lost 0,00 g/cm3 |
| Resistance to corrosión by sulphuric acid at room temperature |
UNE-EN 14483-1/05 |
min class A |
| Impact resistance |
DIN 51155 / ISO 4532 |
min 20N |
| Thermal shock |
BS 1344-1 |
No defects |
| Abrasion resistance |
BS 1344-4 / ASTM C 501 |
<0,05 gr |
| Fire resistance |
UNE-EN 13823:2022
UNE-EN ISO 11925-2:2002 |
B-s1, d0 |
| Corrosión en niebla salina |
UNE-EN ISO 9227:2007 (408 hours) |
No defects |
| Visual inspection |
PEI S 100 / BS 3830 |
No defects |
| MATERIAL BASE |
| Steel |
|
EN 10209 |
| enamel thickness |
ISO 2178
GB/T 13448-2-005 |
min 190 micras x side |
| Steel thickness |
|
1,5 +/- 0.05 mm |
| WEIGHT M2 |
| Weight |
|
14 Kg/m2 |
 |
| METAL FRAMEWORK |
| Stainless steel (Aisi 304 / 316) |
| Galvanized steel |
| SANDWICH PANEL |
| 1 - External face |
| · Vitreous enamelled steel (1,4mm - 2,2mm) |
| 2 - Core |
| · Calcium silicate |
| · Aluminium honeycomb (Honeycomb) |
| · Special woodboard |
| · Rockwool |
| 3 - Posterior face |
· Galvanized steel |
| · Vitreous enamelled steel (1,4mm - 2,2mm) |
| · Stainless steel |
|
|
